Over time the requirements for file systems have increased and the demands for large structures, large files, long file names and more has prompted ever more advanced file systems, the system that accesses and organises the data on mass storage. Today there is a large number of file systems to choose from and this section will describe these in detail.
The emphasis is on Linux but with more input I will be happy to add information for a wider audience.
Most operating systems usually have a general purpose file system for every day use for most kinds of files, reflecting available features in the OS such as permission flags, protection and recovery.
This was the original fs for Linux, back in the days Linux was hosted on minix machines. It is simple but limited in features and hardly ever used these days other than in some rescue disks as it is rather compact.
These are also old and have fallen in disuse and are no longer recommended.
This is the established standard for general purpose in the Linux world. It is fast, efficient and mature and is under continuous development and features such as ACL and transparent compression are on the horizon.
For more information check the ext2fs home page.
This is the name for the upcoming successor to
ext2fs due to enter
stable kernel in the near future. Many features are added to
ext2fs but to avoid confusion over the name after such a radical
upgrade the name will be changed too. You may have heard of it already
but source code is now in beta release .
Patches are available at Linux.org.
This is the fs used by BSD and variants thereof. It is mature but also developed for older types of disk drives where geometries were known. The fs uses a number of tricks to optimise performance but as disk geometries are translated in a number of ways the net effect is no longer so optimal.
The Extent File System (efs) is Silicon Graphics' early file system widely used on IRIX before version 6.0 after which xfs has taken over. While migration to xfs is encouraged efs is still supported and much used on CDs.
There is a Linux driver available in early beta stage, available at Linux extent file system home page.
Silicon Graphics Inc (sgi) has started porting its mainframe grade file system to Linux. Source is not yet available as they are busily cleaning out legal encumbrance but once that is done they will provide the source code under GPL.
More information is already available on the XFS project page at SGI.
As of July, 23th 1997
reiser (at) RICOCHET.NET
has put up the source to his tree based
on the web. While his filesystem has some very interesting features and
is much faster than
ext2fs and is in use by a number of people.
Hopefully it will be ready for kernel 2.4.0 which might be ready at
the end of the year.
The Enhanced File System project is now dead.
This is a variation on the
ext2fs that adds robustness
in case of unexpected interruptions such as power failure.
After such an event
Tux2 fs will restart with the file system
in a consistent, recently recorded state without fsck or
other recovery operations. To achieve this
Tux2 fs uses
a newly designed algorithm called Phase Tree.
More information can be found at the project home page.
This company is responsible for a lot, including a number of filesystems that has at the very least caused confusions.
Actually there are 2
fats out there,
depending on the partition size used but fortunately the difference
is so minor that the whole issue is transparent.
On the plus side these are fast and simple and most OSes understands it and can both read and write this fs. And that is about it.
The minus side is limited safety, severely limited permission flags
and atrocious scalability. For instance with
fat you cannot
have partitions larger than 2 GB.
After about 10 years Microsoft realised
fat was about, well, 10 years
behind the times and created this fs which scales reasonably well.
Permission flags are still limited. NT 4.0 cannot read this file system but Linux can.
At the same time as Microsoft launched
fat32 they also added
support for long file names, known as
fat32 partitions by mounting with
This is the native fs of Win-NT but as complete information is not available there is limited support for other OSes.
These take a radically different approach to file updates by logging modifications for files in a log and later at some time checkpointing the logs.
Reading is roughly as fast as traditional file systems that always update the files directly. Writing is much faster as only updates are appended to a log. All this is transparent to the user. It is in reliability and particularly in checking file system integrity that these file systems really shine. Since the data before last checkpointing is known to be good only the log has to be checked, and this is much faster than for traditional file systems.
Note that while logging filesystems keep track of changes made to both data and inodes, journaling filesystems keep track only of inode changes.
Linux has quite a choice in such file systems but none are yet in production quality. Some are also on hold.
reiserfs also have
features for logging or journaling.
Read-only media has not escaped the ever increasing complexities seen in more general file systems so again there is a large choice to choose from with corresponding opportunities for exciting mistakes.
ext2fs works quite well on a CD-ROM
and seems to save space while offering the normal file system features
such as long file names and permissions that can be retained when
copying files across to read-write media. Also having
on a CD-ROM is possible.
Most of these are used with the CD-ROM media but also the new DVD can be used and you can even use it through the loopback device on a hard disk file for verifying an image before burning a ROM.
There is a read-only
romfs for Linux but as that is not disk
related nothing more will be said about it here.
This was one of the earliest standards for CD-ROM formats, supposedly named after the hotel where the final agreement took place.
High Sierra was so limited in features that new extensions simply
had to appear and while there has been no end to new formats the original
High Sierra remains the common precursor and is therefore still
The International Standards Organisation made their extensions and
formalised the standard into what we know as the
The Linux iso9660 file system supports both High Sierra as well as
Rock Ridge extensions.
Not everyone accepts limits like short filenames and lack of permissions
so very soon the
Rock Ridge extensions appeared to rectify these
Microsoft, not be be outdone in the standards extension game, decided
it should extend CD-ROM formats with some internationalisation features
and called it
Linux supports this standards in kernels 2.0.34 or newer. You need to enable NLS in order to use it.
Joliet is a city outside Chicago; best known for being the site of the prison where Jake was locked up in the movie "Blues Brothers." Rock Ridge (the UNIX extensions to ISO 9660) is named after the (fictional) town in the movie "Blazing Saddles."
With the arrival of DVD with up to about 17 GB of storage capacity
the world seemingly needed another format, this time ambitiously named
Universal Disk Format (UDF).
This is intended to replace
iso9660 and will be required for DVD.
Currently this is not in the standard Linux kernel but a project is underway to make a http://trylinux.com/projects/udf/index.html name="UDF driver"> for Linux. Patches and documentation are available.
More information is also available at the Linux and DVDs page.
There is a large number of networking technologies available that lets you distribute disks throughout a local or even global networks. This is somewhat peripheral to the topic of this HOWTO but as it can be used with local disks I will cover this briefly. It would be best if someone (else) took this into a separate HOWTO...
This is one of the earliest systems that allows mounting a file space
on one machine onto another. There are a number of problems with
ranging from performance to security but it has nevertheless become
This is a system that allows efficient sharing of files across large networks. Starting out as an academic project it is now sold by Transarc whose home page gives you more details.
Derek Atkins, of MIT, ported AFS to Linux and has also set up the Linux AFS mailing List ( email@example.com) for this which is open to the public. Requests to join the list should go to firstname.lastname@example.org and finally bug reports should be directed to email@example.com.
Important: as AFS uses encryption it is restricted software and cannot easily be exported from the US.
IBM who owns Transarc, has announced the availability of the latest version of client as well as server for Linux.
Arla is a free AFS implementation, check the Arla homepage for more information as well as documentation.
A networking filesystem similar to
AFS is underway and is called
This is designed to be more robust and fault tolerant than
and supports mobile, disconnected operations.
Currently it does not scale very well, and does not really have
proper administrative tools, as
AFS does and
Network Block Device
nbd) is available in Linux kernel 2.2
and later and offers reportedly excellent performance. The interesting
thing here is that it can be combined with RAID (see later).
name="Enhanced Network Block Device">
enbd) is a project to enhance the
features such as block journaled multi channel communications,
internal failover and automatic balancing between channels
The intended use is for RAID over the net.
The Global File System is a new file system designed for storage across a wide area network. It is currently in the early stages and more information will come later.
In addition to the general file systems there is also a number of more specific ones, usually to provide higher performance or other features, usually with a tradeoff in other respects.
For short term fast file storage SunOS offers
tmpfs which is
about the same as the
swapfs on NeXT.
This overcomes the inherent slowness in
ufs by caching file data
and keeping control information in memory. This means that data on such
a file system will be lost when rebooting and is therefore mainly
/tmp area but not
/var/tmp which is where
temporary data that must survive a reboot, is placed.
SunOS offers very limited tuning for
tmpfs and the number of
files is even limited by total physical memory of the machine.
Linux now features
tmpfs since kernel version 2.4 and is
enabled by turning on virtual memory file system support (former shm fs).
Under certain circumstances
tmpfs can lock up the system in
early kerbel versions, make sure you use version 2.4.6 or later.
The user file system (
userfs) allows a number of extensions to
traditional file system use such as
FTP based file system, compression (
arcfs) and fast prototyping
and many other features. The
docfs is based on this filesystem.
for more information.
When disks are added, removed or just fail it is likely that
disk device names of the remaining disks will change.
For instance if
sdb fails then the old
sdb and so on.
Note that in this case
hdb etc will remain unchanged.
Likewise if a new drive is added the reverse may happen.
There is no guarantee that SCSI ID 0 becomes
sda and that adding
disks in increasing ID order will just add a new device name without
renaming previous entries, as some SCSI drivers assign from ID 0 and up
while others reverse the scanning order.
Likewise adding a SCSI host adapter can also cause renaming.
Generally device names are assigned in the order they are found.
The source of the problem lies in the limited number of bits available
for major and minor numbering in the device files used to describe the
device itself. You an see these in the
on the numbering and allocation can be found in
Currently there are 2 solutions to this problem in various stages of
works by creating a database of drives and where they belong, check man scsifs and the scsidev home page for more information
is a more long term project aimed at getting around the whole business of device numbering by making the /dev directory a kernel file system in the same way as /proc is. More information will appear as it becomes available.
For a number of reasons it is currently difficult to have files
bigger than 2 GB. One file system that tries to overcome this
smugfs which is very fast but also simple. For instance
there are no directories and the block allocation is simple.
It is available as compressed tarred source code and while it worked with kernel version 2.1.85 it is quite possible some work is required to make it fit into newer kernels. Also the low version number (0.0) suggests extra care is required.
There is a jungle of choices but generally it is recommended to
use the general file system that comes with your distribution.
If you use
ufs and have some kind of
you should first start off with the general file system to get
an idea of the space requirements and if necessary buy more
RAM to support the size of
tmpfs you need. Otherwise you
will end up with mysterious crashes and lost time.
If you use dual boot and need to transfer data between the two
OSes one of the simplest ways is to use an appropriately sized
partition formatted with
fat as most systems can reliably
read and write this.
Remember the limit of 2 GB for
For more information of file system interconnectivity you can check out the file system page which has been superseded by file system and the article Kragen's Amazing List of Filesystems.
That guide is being superseded by a HOWTO which is underway and a link will be added when it is ready.
To avoid total havoc with device renaming if a drive fails
check out the scanning order of your system and try to keep
your root system on
sda and removable media
such as ZIP drives at the end of the scanning order.